Load Switch IC with Ideal Diode Function (IEC 62368-1 Certification)
The XC8110 series are load switch ICs that reproduce ideal diodes, and equipped with functions including chip enable (CE), over current limit, inrush current limit, and thermal shutdown.
These ICs perform regulation control to ensure that their VOUT pin voltage is a value of VIN - 20mV, so they can suppress heat generation to a greater extent than general diodes. When a voltage is applied at the VOUT pin and it becomes equal to or higher than VIN - 20mV, the driver FET will turn OFF. Furthermore, when the VOUT pin voltage becomes equal to or higher than VIN + 20mV, the IC’s internal power supply will switch from VIN to VOUT, which can prevent backflow current flowing from the VOUT pin through the parasitic diode to the VIN pin, while also interrupting current flowing from VIN to the IC. This makes it possible to easily achieve an output voltage OR circuit, and to reduce battery consumption for backup purposes.
This IC has been certified by the international standard IEC 62368-1 that defines safety requirements, and it is possible to simplify the single failure test of the subsequent circuits. By adopting the foldback method for over current limiting, the short-circuit current can be suppressed to 50mA, and it can be used safely even in the event of a short-circuit.
|Input Voltage Range||1.5V ~ 6.0V|
|Output Current||500mA (VIN > 1.7V)|
|Reverse Bias Current||0.8μA|
|Over current limit||850mA|
|Function||Ideal diode function|
Inrush current prevention
|Protective function||Over current limit|
Thermal shutdown function
|Standard||IEC 62368-1:2018 Certification|
|Operating Ambient||-40℃~ 105℃|
Typical Application Circuit
- Gerberfile:XC8110 SOT-25
- Gerberfile:XC8110 USP-6B06
- Gerberfile:XC8110 WLP-4-02
- Evaboard Data:XC8110 WLP-4-02
- Certificate of Compliance IEC 62368-1:2018
- OR Circuits and Ship Functions : XC8110 Circuit and PCB layout
XC8110 Series Part Numbers
Inquiries About XC8110
Please wait for a while until the form is displaying.
If the form is not displaying, please contact us from inquiry form.