Charging ICs for Rechargeable Batteries Compatible with CV Charging (0.8μA Low Power Consumption Voltage Regulator)

The XC6242 series of products consists of regulators which have achieved an ultra-low supply current of 0.8μA, and can be used for charging rechargeable batteries compatible with CV (Constant Voltage) charging.

The output voltage of these products is internally fixed to be compatible with the CV voltages of rechargeable batteries. Even if fluctuations are taken into account, the CV voltages of rechargeable batteries will not be exceeded, so charging can be performed without concern.

The addition of a diode on the input side also allows the sink current flowing from a rechargeable battery to the regulator to be suppressed to 0.24μA, which can greatly contribute to extending the battery-driven time while charging is not being performed.

The CE function can turn the regulator output off and put the IC into a shutdown state where the supply current can be substantially reduced.

Feature

Operating Voltage Range 1.5V ~ 6.0V
Output Voltage 2.63V ± 1.5%
Maximum Output Current 150mA (300mA Limit)
Dropout Voltage 510mV@IOUT=100mA
VOUT Pin Sink Current 0.8μA
Stand-by Current 0.24μA
Operating Temperature Range -40℃ ~ 105℃
Protective Function Current Limit
Output Capacitor Ceramic Capacitor
Environmentally Friendly EU RoHS Compliant, Pb Free

Typical Application Circuit

Technical Document

Packages

Package Number of Pins Pcs/Reel Package Size(mm)
USPN-4 4 5,000 0.9 x 1.2 x 0.4

XC6242 Series Part Numbers

Part number Sample Type Output Voltage Package EDA Online Store
XC6242A2637R-G CE “H” Active 2.63V (±1.5% Accuracy) USPN-4

Inquiries About XC6242

Please wait for a while until the form is displaying.

If the form is not displaying, please contact us from inquiry form.