Here explains characteristics and usage of measured electrical characteristics comparison tool provided by TOREX on the website.
The measured electrical characteristics comparison tool is a tool that can easily compare efficiency, ripple voltage, output voltage (load regulation) and mounting area of DC/DC converter.
With the characteristics shown in the datasheet, the bias condition may have been different depending on the products and the comparison under the same conditions have been difficult. In addition, it has been difficult to evaluate the mounting area from the datasheet and it have been necessary to estimate the mounting area from BOM.
As this tool can compare characteristics / mounting area under the same bias condition / actual use conditions, it is possible to easily select an optimum DC/DC converter for a desirable characteristics / mounting area even if you do not know the product.
Characteristics / usage of measured electrical characteristics comparison tool
- Free & no registration required
- Just access the web page
- It is possible to easily compare the measured data of various DC/DC converters under the same conditions
- It is possible to select an optimum DC/DC converter even if you do not know the product
The measured electrical characteristics comparison tool is free and no registration is required. You can use it immediately by just accessing the webpage (https://product.torexsemi.com/en/design-support/dcdc-efficiency-size-comparison).
The setup is not required. It is possible to compare characteristics of various DC/DC converter based on graphs and lists by just "select Topology" ⇒ "select Mode" ⇒ "input the power supply specifications".
- It is easily possible to compare the mounting area that cannot be easily evaluated on the datasheet
- It is possible to confirm the measured data of ripple voltage / load regulation that cannot be easily confirmed with simulation
Some characteristics significantly deviate from the measured data and may not be reproduced on simulation. However, this tool displays the observation result, so you can correctly confirm load regulation and ripple voltage that cannot be easily reproduced on simulation.
